N Scale Kato F7 Images

Here are some images showing the decoder installation and the finished operating headlights.

An overhead view showing the lower headlight installed in the front, and the decoder installed in the rear.

A close up of the front showing the surface mount LED in the lower position.

The upper headlight operating independently. Both this and the following image were taken with the factory dual headlight lens installed. It has a light pipe between the two lenses that is meant to carry light from the upper LED to the lower headlight lens. Removing the connection between the two lenses would help eliminate any stray light passing from one to the other lens.

The lower headlight operating all by itself. Thanks to John Claudino of Aztec Manufacturing for helping to make this image possible.

Return to N Scale Kato F7 main page

Return to Decoderizer main page

Go to Decoderizer Contact page

Copyright 2003, 2009 by Robert M. Luzenski, all rights reserved